Skip to content

Should I use IPv6 at home?

For most households, the practical answer is yes: keep IPv6 enabled together with IPv4 when the provider and router support it.

OUTPUT FORMATSHTMLJSONMarkdown

That combined arrangement is dual stack. Microsoft advises against disabling IPv6, and a temporary switch-off is best reserved for isolating a specific fault.

Check if you have IPv6

Open test-ipv6.com in a browser. The result shows whether an IPv6 address is assigned and whether IPv6 connectivity works. A command-line alternative is also available through protected module code0001. Receiving replies means the device can reach the internet using IPv6.

How to get an IPv6 address

Native IPv6 depends on three layers working together. First, the internet provider must assign IPv6 to the connection; availability differs considerably between providers, even within one country, and APNIC publishes provider measurements. Without provider support, native IPv6 is unavailable on that connection. Second, the router must support IPv6 and have it enabled, normally through the Internet or WAN section of its admin page, using the connection details supplied by the provider. Some providers enable IPv6 by default on supplied routers. Third, devices usually need no change: current Windows, macOS, iOS, Android and most Linux desktop systems configure IPv6 automatically when the router announces it through SLAAC. Keeping SLAAC enabled helps broad compatibility. Android does not support traditional DHCPv6 assignment of individual addresses, known as IA_NA, although most Android 11 and later devices support DHCPv6 Prefix Delegation.

Benefits of IPv6 at home

A key advantage is that each device can receive its own public address. IPv6 traffic does not require network address translation, which can simplify peer-to-peer activities such as games and video calls, while the router firewall continues to govern incoming connections. IPv6 also avoids carrier-grade NAT, the shared IPv4 address some providers place across many customers. Those benefits do not make IPv6 automatically faster or more secure: speed follows the provider network, and security follows firewall configuration and device updates.

Security and privacy

Because devices hold public IPv6 addresses, check the router firewall. RFC 6092 recommends blocking unsolicited incoming IPv6 traffic by default on home routers, so confirm that the IPv6 firewall is switched on. For privacy, Windows, macOS, iOS and Android normally use temporary IPv6 addresses for outgoing connections and rotate them regularly, preventing the address from exposing the device hardware MAC address.

Should you turn IPv6 off?

Disabling IPv6 is not a harmless default. Some software expects it to be available, and Microsoft warns that certain Windows components may fail without it. Treat a change as a diagnostic step in limited situations. If pages load slowly, run test-ipv6.com to see whether IPv6 is implicated; when errors appear, check router settings or contact the provider before disabling anything. A VPN creates another exception: some VPN apps route only IPv4, allowing IPv6 traffic to bypass the tunnel, while others provide IPv6 leak protection that blocks such traffic. Verify IPv6 support or leak protection in the VPN. Without either, disable IPv6 on that device during VPN use or choose a VPN that handles IPv6. Preferring IPv4 first in Windows changes only the order of address attempts; IPv6 remains active and therefore does not stop VPN leaks. To disable IPv6 across the entire network, change the router setting.

IPv6 and web scraping from home

Changing address family does not disguise scraping activity. IPv4 and IPv6 addresses both belong to the home connection, so a website can still block either one. A proxy service changes the visible origin instead; the captured product description refers to requests routed through its own proxies, including premium residential proxies selected by country using country_code.

Quick decision checklist

Use this decision checklist: confirm provider and router support, verify connectivity with test-ipv6.com, keep dual stack enabled, confirm the IPv6 firewall is on, and check VPN handling before considering a switch-off. Only disable IPv6 to test a suspected fault or to close a confirmed VPN leak, then restore it when the cause is resolved.

Frequently asked questions

Should I turn IPv6 off at home?

In most cases, leave it enabled alongside IPv4. Disabling it can break software that expects it to be present, so switch it off only as a targeted test or when a VPN cannot protect IPv6 traffic.

How can I check whether my connection uses IPv6?

Open test-ipv6.com in a browser to see whether an IPv6 address is present and working, or use the supplied command-line check in protected module code0001. Replies indicate the device can reach the internet over IPv6.

Is IPv6 faster or more secure than IPv4?

No. IPv6 is not inherently faster or more secure. Performance depends on the provider network, while protection depends on the router firewall and keeping devices updated.

Does switching between IPv4 and IPv6 hide web scraping?

No. Both address families identify the same home connection, so changing between them does not conceal a scraper from a website.