Skip to content

Free Proxy Lists for Web Scraping: A Tested Comparison

Free proxy lists look like a shortcut: a page of IP addresses you can paste into a scraper and start rotating. In practice, the quality varies enormously, and the cost of a bad proxy shows up as timeouts, captchas and login redirects rather than a bill. This guide compares five free proxy list sites on the same targets, explains what the numbers mean, and gives you a short checklist for deciding whether a free proxy is good enough for the job in front of you.

What the comparison measures

Each list was tested against four targets: Instagram, Google, Amazon, and a set of 300 URLs drawn from the top 1,000 Alexa-ranked sites. For every target, 1,000 requests were made through proxies taken from each list. Three outcomes were recorded: errors (timeouts, network failures, HTTPS problems), blocked requests (the site refused or challenged the proxy), and successful requests. Average response time was also recorded.

The distinction between an error and a block matters. An error means the proxy itself failed to complete the request. A block means the request reached the site but the site pushed back. Google typically answers a blocked IP with a 429 status code, Amazon returns a 200 response with a captcha in the body, and Instagram redirects to a login page. A list with a low error rate but a high block rate is still a poor choice for that target, because the proxy is reachable but not trusted.

How the five lists compare

The tables below reproduce the captured results for each site. They are a dated reference from the original test run, not a live measurement, so treat them as a starting point and re-test any proxy before relying on it. The per-site tables show the same four targets for each list; the benchmark tables further down break the results out by target so you can compare lists side by side.

The managed scraping option

The comparison includes a managed scraping service alongside the free lists. In the captured results it recorded the lowest error and block counts across the four targets, which fits a service that controls its own proxy pool rather than harvesting public addresses. It is not a source of free IP addresses you can collect and reuse; it is a paid product with a free trial. Specific terms — trial credits, pricing and support availability — are set by the provider and should be confirmed before you commit. If your goal is a one-off rotation, a free list may be enough. If you need repeatable access to Google, Amazon or Instagram, the captured data points toward the managed route.

ProxyScrape

ProxyScrape offers downloadable lists in TXT, CSV and JSON, which makes it convenient for scripts that want to pull a fresh batch on a schedule. You can filter by country, anonymity level and SSL support, and it covers HTTP, SOCKS4/5 and residential proxies. The captured results show a high error rate on Google and Instagram and a high block rate on Instagram, so it is best treated as a bulk source to be filtered and tested rather than a ready-to-use pool. The site also provides an online proxy checker you can use to confirm a proxy is still alive before a run.

free-proxy.cz

free-proxy.cz is one of the older list sites, with a large table you can filter by country, protocol and anonymity level and sort by speed, uptime, response time and last-checked time. It also lists free web proxies and has an IP address info tool that shows your current connection details. There is no paid tier, so there is no support or guarantee that a listed proxy is online or safe. The captured results show very high error rates on Google and Instagram and a moderate success rate on Amazon and the top-ranked sites.

GatherProxy

GatherProxy organises proxies by country, port, anonymity and protocol, and adds a separate SOCKS section. It also offers a downloadable proxy scraper, an embeddable list widget and a proxy checker that can export results in formats such as CSV. One practical difference is that you must register with an email address before you can browse the lists. At the time of the original test the service was down, so no benchmark results were captured for it. Treat its availability as something to verify yourself before planning around it.

freeproxylists.net

freeproxylists.net presents a single table of proxies with filters for country, port and uptime, plus a by-country view that shows how many proxies are available per country. It is deliberately basic: there is no download option, no paid tier and no bundled scraper tool. The captured results were the strongest of the free lists in this comparison, particularly on Amazon and the top-ranked sites, though the Google and Instagram numbers were still poor. The site does not publish how often its list is refreshed, so check any proxy before use.

Reading the benchmark tables

The benchmark tables break the same results out by target. On Instagram, the free lists produced between 14 and 29 successes out of 1,000 requests, with block rates above 300 in every case. On Google, successes ranged from 16 to 42, and error counts were above 950 for every free list. Amazon was more forgiving: freeproxylists.net reached 611 successes and ProxyScrape 539, while free-proxy.cz managed 322. On the top-ranked sites, freeproxylists.net led the free lists with 517 successes. The pattern is consistent: the free lists fail more often than they succeed, and the failure mode shifts from errors to blocks depending on how heavily the target is protected.

Why free proxies get blocked

The dominant problem in the captured results was not a single bad proxy but a shared one. Free lists are popular with SEO suites and scraping utilities that pull addresses automatically, so the same IPs end up serving many users and many requests. Google, which those tools query heavily, learns to reject the addresses. That is why a proxy can look healthy in a checker and still fail on a protected target: the checker confirms the proxy is reachable, not that the destination will accept it.

Keyword and rank-tracking suites such as Scrapebox and Screaming Frog are built to harvest these public lists and then hammer Google with them, so a handful of addresses absorb a disproportionate share of the traffic. Google's defences respond to that pattern, and the addresses end up on blocklists that affect every user of the list, not just the tool that caused it.

Safety and privacy trade-offs

Routing a request through a free proxy means handing that traffic to a stranger's server. Whoever runs the endpoint sits between you and the destination, so they can read what passes through, keep logs of it, or rewrite the response before it reaches you — including by slipping in ads or malicious payloads. Plain HTTP gives you no protection on that leg because nothing is encrypted in transit. SOCKS5 is more versatile about the kinds of traffic it can carry, but versatility is not the same as trust: an unknown SOCKS5 endpoint is still an unknown endpoint. The practical rule is to keep credentials, personal data and anything sensitive off free proxies, and to prefer HTTPS targets where the connection is encrypted end to end.

A pre-flight checklist for any free proxy

Before adding a free proxy to a scraping run, work through these checks:

  1. Confirm the protocol. Match HTTP or SOCKS5 to what your client supports; a mismatch will fail before the request leaves your machine.
  2. Check anonymity. A transparent proxy forwards your real IP, which defeats the purpose.
  3. Test reachability. Use the list's own checker or a request to a neutral endpoint to confirm the proxy responds.
  4. Test the actual target. A proxy that works on a neutral site may still be blocked by Google, Amazon or Instagram.
  5. Measure response time. A slow proxy multiplies your run time and increases timeout risk.
  6. Check the country. If you need a specific geolocation, confirm the proxy's exit country rather than assuming it from the list.
  7. Decide what data is in scope. If the request carries credentials or personal data, do not route it through an unknown proxy.

When a free list is enough, and when it is not

A free list is a reasonable choice for a short, low-stakes job where a failed request can simply be retried, and where you are not sending sensitive data. It is a poor choice when you need consistent access to a protected target, when you need the same IP to behave predictably across a session, or when a failure would cost more than the time saved. In those cases the captured data points toward a managed service with its own proxy pool and support, because the free lists' error and block rates are too high to build a reliable pipeline on.

Frequently asked questions

Are free proxy lists safe to use for web scraping?

They carry real risk. A free proxy operator can see your traffic, and public proxies may log requests, inject ads or alter responses. HTTP proxies do not encrypt data in transit. Avoid sending credentials or personal data through an unknown proxy, and prefer HTTPS targets where the connection is encrypted end to end.

What is the difference between an error and a block in the benchmark?

An error means the proxy failed to complete the request, for example a timeout or a network or HTTPS failure. A block means the request reached the site but was refused or challenged, such as a 429 from Google, a captcha from Amazon or a login redirect from Instagram. A proxy can have a low error rate and still be useless on a target if its block rate is high.

Why do free proxies get blocked so often?

Popular free lists are harvested by many tools and users, so the same addresses are reused heavily. Google and similar targets see that traffic and block the addresses. A proxy checker can confirm the proxy is reachable, but it cannot confirm that a protected target will accept it.

Which free proxy list performed best in the captured results?

Among the free lists, freeproxylists.net had the strongest captured results, particularly on Amazon and the top-ranked sites. Its Google and Instagram numbers were still poor. GatherProxy could not be benchmarked because the service was down at the time of the original test.

When should I use a managed scraping service instead of a free proxy list?

When you need consistent access to a protected target, predictable behaviour across a session, or support when something fails. The captured error and block rates for free lists are too high to build a reliable pipeline on. A managed service with its own proxy pool is the better fit for repeatable work.

Managed scraping service captured results
WebsiteErrorsBlockedSuccessAverage Time
Instagram4509553.3
Google8009208.30
Amazon2209783.34
Top 300 Alexa509953.34

Dated reference from the original test run; re-test before relying on it.

ProxyScrape captured results
WebsiteErrorsBlockedSuccessAverage time
Instagram3925921625.55
Google9584474216.12
Amazon4451653920.37
Top 300 Alexa551144813.60

Dated reference from the original test run; re-test before relying on it.

free-proxy.cz captured results
WebsiteErrorsBlockedSuccessAverage time
Instagram654332143.74
Google96990313.74
Amazon675332216.40
Top 300 Alexa742025812.73

Dated reference from the original test run; re-test before relying on it.

freeproxylists.net captured results
WebsiteErrorsBlockedSuccessAverage time
Instagram386585290.70
Google984640168.90
Amazon3761361121.02
Top 300 Alexa483051710.90

Dated reference from the original test run; re-test before relying on it.